Necklaces

 

Required tools and materials:
Side cutting pliers, combination pliers, file, jewel cement, if you like you can use
“extra hands” to hold the ornament when you glue the little stones into place.

Ornaments:
Chain (DV 763), copper wire (OV 930-G), little rhinestones in different  colors
and other embellishments.
Ornaments: OR 096, OR 099, OR 109, LT 500, FL 200 (from left to right).

How to attach the chain to the ornament:
Cut a piece of chain (DV 763) of the desired length, put a piece of copper wire
through the last eye of the chain and through an eye of the ornament.
Twist the wire a few times, cut it as short as possible and bend it behind the ornament.
Repeat this with the other end of the chain.

Attach the chain (DV 763) to ornament OR 096 as described above.
Glue three stones into place using jewel cement.

Cut the center eye of OR 096 and file the edge if necessary.
Bend the other two eyes using the combination pliers a little bit to the side outwards.
Attach a chain to the ornament and glue four stones into place.

Cut the two outer eyes of OR 096 and file the edges if necessary.
Bend the ends toward each other and to the little flower in the center.
Attach a chain to the remaining eye and glue three stones into place.

Cut ornament LT 500 as indicated by the lines.
Bend the upper part of the ornament to the back using the combination pliers.
Glue a little stone in the remaining eye.

Cut ornament LT 500 as indicated by the lines.
Bend the upper part of the ornament to the back.
Glue four stones into place.

Cut ornament LT 500 as indicated by the lines.
Bend the upper part of the ornament to the back.
Glue little stones or other embellishments into place.

Bend the two arms of OR 099 a little bit upwards forming a choker.
Embellish the choker with little stones.

Attach the chain to ornament OR 109.
Glue a little hart (OR 055) in the middle of the ornament and a stone in the center eye.
You can paint the hart red using nail polish before gluing it in the middle.

Cut ornament OR 109 as indicated by the lines.
Attach a piece of chain to the ornament and glue three stones into place.

Attach a piece of chain to ornament FL 200 and glue six stones into place.

Of course there are numerous variations possible.
So let your creativity work!