Etagère:
– large   (W8-G/ W8-GS)
– small   (W8-K/ W8-KS)

 

Etagère Large A

Etagère Large A

Required materials from left to right:
DV 756, FL 272, FL 339, FL 338, KR 690 (2x), KR 691 (2x), KR 666 (2x), DV 754, OR 064
Small hammer, round pointed file, jewel cement, side cutting pliers.

These etagères are no longer as a kit available.

Cut off the pin of DV 756 at the nick of the pin and glue the pin in the middle of FL 272.
Make sure the pin stands vertical. Let it dry thoroughly

File the little tube (KR 690) a little bit wider so it can just stand on top of KR 691.
Put KR 691 through the middle of FL 339 (“nice” side of FL 339 facing upwards).
Place the little tube KR 690 on top of KR 691 and give it a gentle smash
with the hammer in order to let the tube fit over KR 691.
Do the same with FL 338 but now with the “nice” side of Fl 338 facing downwards.

Put the tube of FL 339 over the pin of DV 756, then put KR 666 on top of the pin
and in the tube KR 690. Put a little bit of glue between the adjacent parts each time.

Make sure that the hole of KR 666 stays free of glue.
Cut off the pin of DV 754 to a total length of approximately 5 mm.
Glue the pin in the tube of FL 338 and in the hole of KR 666.

Glue the second ornament KR 666 vertical in the little cup of DV 754 and glue
the little heart on top of KR 666. Fill the étagère with pastries, cookies, chocolates……

Etagère small B

Etagère Small B

Required materials from left to right:
DV 755, FL 325, FL 337, FL 338, KR 690, KR 691 (2x), KR 666.
Small hammer, round pointed file, jewel cement.

This etagère is no longer as a kit available.

Glue the pin of DV 755 in the middle of FL 325.
Make sure the pin stands vertical. Let it dry thoroughly.

File the little tube (KR 690) a little bit wider so it can just stand on top of KR 691.
Put KR 691 through the middle of FL 338 (“nice” side of FL 338 facing upwards).
Place the little tube KR 690 on top of KR 691 and give it a gentle smash
with the hammer in order to let the tube fit over KR 691.

Put the second KR 691 through the middle of Fl 337 and place this on top of the tube of FL 338.
Give it a gentle smash with the hammer in order to let the tube fit over KR 691.
The tips of FL 337 should be pointing upwards.

Glue the etagère on the base with the pin and glue KR 666 on top of the pin.
Fill the étagère with sweets, cookies, chocolates….

Silver Colored Etagères

The instruction for the silver colored etagères is the same as for
the gold ones with a few adjustments, namely:
Ornament FL 272 of the large etagère is replaced by ornament FL 323-S,
DV 756 is replaced by DV 755-S and the little heart on top is omitted.
Ornament FL 325 of the small etagère is replaced by ornament FL 323-S.

These etagères are no longer as a kit available.