Hanging lamps in Tiffany style
W21-A / W21-B / W21-C

 

Lamp A

This lamp A is no longer as kit available.

Required materials for lamp A: CK1010-1a, FL 452, FL 306, FL 280,
nail polish in the colors of your choice.

Step 1
Bend the four parts of ornament FL 306 slightly towards each other
to give the shade a somewhat more spherical shape.

Step 2
Close the gaps on the inside of the shade with nail polish according to the color pattern
as shown in the picture. In the example red, green and white nail polish has been used.
Of course you can adjust the pattern and the colors to your own preferences.
Swipe the brush of the nail polish along the holes of the shade so the holes will close.

It is important to let each color dry completely before starting with the next color.
If there appears a little hole in the polish after drying, just add some more polish
on the inside of the shade. Do not try to fill all the holes at once, it is easier
to proceed in several stages

Step 3
Put the ornaments on the wire of the light as shown in the picture.
Ornament FL 452 will fit smoothly in the center hole of the shade FL 306.

 

Result Lamp A:

 

 

 

 

Lamp B (with transparent pendants)
You can order a set of parts to make this lamp in the webshop
with order number W21-B.

Required materials for lamp B: CK1010-1a, FL 452, FL 306, FL 280,
KR 660 (28x), DV 771 (28x), nail polish in the colors of your choice, combination pliers

Step 1
Bend the four parts of ornament FL 306 slightly towards each other
to give the shade a somewhat more spherical shape.

Step 2
Close the gaps on the inside of the shade with nail polish according to the color pattern
as shown in the picture. White nail polish has been used in the example.
Of course you can adjust the pattern and the colors to your own preferences.
Swipe the brush of the nail polish along the holes of the shade so the holes will close.

It is important to let each color dry completely before starting with the next color.
If there appears a little hole in the polish after drying, just add some more polish
on the inside of the shade. Do not try to fill all the holes at once, it is easier
to proceed in several stages.
Attention:
Leave the bottom row of gaps open in order to attach the pendants later on.

Step 3
When the nail polish is dry attach the pendants (KR 660) to the shade
using the open rings (DV 771) and the combination pliers.
Put the ornaments on the wire of the light as shown in the picture.
Ornament FL 452 will fit smoothly in the center hole of the shade FL 306.

Result Lamp B:

 

 

 

 

Lamp C (with colored pendants)
You can order a set of parts to make this lamp in the webshop
with order number W21-C.

Required materials for lamp C: CK1010-1a, FL 452, FL 306, FL 280,
KR 660 (28x), DV 771 (28x) nail polish in the colors of your choice,
combination pliers, double sided tape

Step 1
Bend the four parts of ornament FL 306 slightly towards each other
to give the shade a somewhat more spherical shape.

Step 2
Close the gaps on the inside of the shade with nail polish according to the color pattern
as shown in the picture. In the example red, green and white nail polish has been used.
Of course you can adjust the pattern and the colors to your own preferences.
Swipe the brush of the nail polish along the holes of the shade so the holes will close.

It is important to let each color dry completely before starting with the next color.
If there appears a little hole in the polish after drying, just add some more polish
on the inside of the shade. Do not try to fill all the holes at once, it is easier
to proceed in several stages.
Attention:
Leave the bottom row of gaps open in order to attach the pendants later on.

Step 3
If you look closely at the rings of the pendants KR 660 you will see that these rings
are folded on top of each other.  Bend the top ring open, using your fingernails,
and take out the little stone. Do not bend the pendant open completely but just a little.
Do this with all 28 pendants.

Step 4
Place the stones on a piece of double-sided tape and paint them with nail polish
in the color of your choice. You only have to paint one side of the stones.
When the nail polish is dry put the stones back in the pendants and fold the rings back in place.

Step 5
Attach the pendants to the shade using the open rings and the combination pliers.
Put the ornaments on the wire of the light as shown in the picture.
Ornament FL 452 will fit smoothly in the center hole of the shade FL 306.

 


Result Lamp C:

 

The next picture is showing the result of a white shade with white colored pendants.
As you can see all sorts of variations are possible.